We’re here to help:
Easy ways to get the answers you need.
1. HFBZ-135L Suspended Type Roadheader is mainly used for driving coal roadways, semi-coal rock roadways, and soft rock roadways and tunnels. Mainly aimed at the construction of low coal mine roadway soft rock. The body is short, the center of gravity is low, the climbing ability is strong, and the stability is strong;
2. Dust removal spray system has internal and external spray functions, with good dust suppression and pick cooling effects;
3. The traveling drive system adopts the highly integrated international advanced technology of motor and reducer, and the output torque is large, which is suitable for operation;
4. hydraulic system adopts constant power, pressure cut-off, load-sensitive control, and uses bypass filter technology to effectively increase the life of hydraulic components and reduce system failures. The main hydraulic components are all internationally renowned brands;
5. The electrical system uses an explosion-proof and intrinsically safe switch box and an intrinsically safe operation box, which are small in size and light in weight; High abrasiveness and long service life;
6. The intermediate conveyor has a straight structure, smoothly overlaps with the shovel, and has a high gantry and smooth transportation;
7. The main body and rear support are welded with a thick plate box structure, which has good rigidity and high reliability;
8. cutting mechanism has a telescopic function, which is conducive to sweeping and trimming, reducing car moving, high cutting efficiency, and deep undercover;
9. double seat configuration, and the seat can be adjusted to meet the needs of different operating positions, and the operation is comfortable and convenient;
10. The operating handle fully considers ergonomics, and the operation is convenient and comfortable;
11. Large cone angle cutting head design, reasonable arrangement of picks, strong drilling, and rock breaking capabilities, low pick loss, and high tunneling efficiency;
12. the self-locking washer is added to the connection position of key components, which is durable and reliable.
Cutting Head
The cement mill clinker uses 3D digital model design and finite element analysis for optimization. The pick arrangement is reasonable and the rock-breaking ability is strong. The picks have high cutting efficiency, the cutter body and the cutter head are resistant to wear and have a long service life. The guide plate adopts an imported high-strength wear-resistant steel plate, which improves the service life.
Walking Part
The traveling drive adopts the German original hydraulic motor and reducer, which has great traction and strong climbing ability.
High-strength cast steel track shoes, strong impact resistance.
Handle
Rexroth slice handle adopts gradual control, high sensitivity, and precise and non-clearance control features.
The handle plunger has anti-rust features, long service life, good operating feeling, and a low failure rate.
Star Wheel
The shovel drive device is driven by a low-speed high-torque hydraulic motor, with imported bearings and end seals inside. The star wheel is divided into three-claw, four-claw, and five-claw structures, and the wear-resistant layer is piled on it, which is resistant to wear and has high efficiency.
Cutting Motor
Using high-power two-speed cutting technology, according to the hardness of the cut coal, the high and low speeds can be manually switched, and the cutting efficiency is high. It adopts a water-cooled shell structure, which has a good cooling effect and high protection level. Temperature relay and car white thermal resistance are embedded at the end of the winding outlet, which can effectively protect the motor temperature. The wiring cavity is separately welded by steel plates and can be connected to two power supply voltages of 1140V/660V.
Item | Unit | Parameter |
Overall dimension | ||
Overall weight | t | 42 |
length | mm | 8932 |
Width | ||
Shovel plate | mm | 2800/2500 |
Main body | mm | 2200 |
Height | ||
Cutting head is laid horizontally on the highest point | mm | 1608 |
Main body | mm | 1470 |
Undercut depth | mm | 295 |
Ground clearance of machine | mm | 158 |
Range of positioning cutting | ||
Height | mm | 4000 |
Width | mm | 4840 |
Area | m^2 | 19.3 |
gantry height | mm | 350 |
Grade ability | ° | ±18 |
Travelling speed | m/min | 6 |
Ground pressure | MPa | 0.131 |
Gross power | kW | 210 |
Power of Cutting motor | kW | 135 |
Power of electric pump motor | kW | 75 |
Input voltage | V | AC1140/660 |
Input frequency | Hz | 50 |
Rotation speed of cutting head | r/min | 38 |
Stretch | mm | 500 |
Loading capacity | ||
Starwheel type | m³/min | 4.32 |
Crawler width | mm | 520 |
Out. width of crawlers | mm | 2200 |
Tensioning style | / | Cylinder tensioning and snap-gauge locking |
Water pressure of spraying | ||
Water pressure of outside spraying | MPa | ≥4 |
Water pressure of inside spraying | MPa | ≥2 |
Max. non-removable parts size | m | 3.41×1.38×1.33 |
Max. non-removable parts mass | kg | 4700 |